App user manual

 

App

For iOS and Android

 

© by Bird Home Automation GmbH  |  www.doorbird.com 

 

App User Manual  

 

The  user  manual  for  the  App  is  not  provided  in  printed form  since  it  is  constantly  updated  to  match  additional updates  of  features  made  to  the  App.  You  can  always access  the  latest  version  of  this  user  manual  by downloading it from:https://support.doorbirdusa.com/hc/en-us

Additional  notes  such  as  the  QUICKSTART  guides, installation guides for the device and much more can also be downloaded from: https://support.doorbirdusa.com/hc/en-us

For reasons of brevity, we use the term “device” to refer to our  “DoorBird  Video  Door  Station”  and  “BirdGuard” products, and use the term “mobile device” to refer to a smartphone or tablet.

Download

Download  and  open  the  App  "DoorBird"  by  Bird  Home Automation  from  the  Apple  App  Store  or  Google  Play Store.

Screens

We have worked towards making the App’s interface as simple and intuitive as possible. Thus, we’ve done away with many of configurable settings and buttons and have only made the most important functions configurable, as is the case with most common door entry phones. All of our products are pre-configured to use the optimal settings for video,  network  transport  protocols,  compression, encryption, ports and much more. There’s also no need to enter IP addresses or setup port forwarding etc., which not only makes our products simple to set up but also reliable to use.

 

The screenshots are based on how our App is displayed on an iPhone running Apple’s iOS. There may be minor differences as to how this appears on iPad and Android smartphones or tablets.

Nevertheless, the descriptions and functions are identical across those platforms.

Content

Live-Screen ....................................................................... 3 History ............................................................................... 4 Settings ............................................................................. 5

Add Device ........................................................................ 6 Edit Device ........................................................................ 7 Administration – Login ....................................................... 8 Administration – Settings .................................................. 9 Administration – Validation type/-schedule ..................... 13 Administration – Edit User ............................................... 14 Administration – SIP Settings .......................................... 15 Administration – Add Peripherals .................................... 16 Administration – IP Door Chime ...................................... 17 Administration – IP I/O Door Controller ........................... 18 Legal Notes ..................................................................... 19

 

Live-Screen

 

This screen allows you to speak to your visitors.

 

 

1. Connection strength

These bars show the connection strength across the entire network route from the App right up to the device across all access points, routers, cables, etc. At the same time, the strength indicator also indicates data throughput and the latency of transferred data packets.

1. Connection method

Shows how the App is connected to the video door station. The house symbol indicates that the App is connected to your device directly through your LAN. The cloud symbol indicates that the App is connected to your device through our highly secure cloud server via the internet.

1. Live picture

The  resolution,  compression  and  number  of  frames  per second depend on the strength of the connection as well as on the connection method.

1. Door opening button

Tap this button to open the door. You’ll need to ensure that you’ve connected a door opener to the device first.

1. Light button

Tap this button to activate the infrared LED ring on the device. Once the infrared LED ring has been activated, the device  switches  into  night-vision  mode,  and  then  the image  sensor  will  only  detect  infrared  light.  This  light switches itself off automatically after a short time.

 

1. Answering/hanging-up button

Tap this button to start or end voice communications.

1. Connection status

A green dot indicates that the App is able to connect to the device, either via LAN or through the internet. A red dot indicates that the App cannot connect to the device. It can sometimes take a number of seconds before the current status is displayed on screen.

1. Device list

You  can  add  up  to  10  compatible  devices  to  the  App. Furthermore, if an event was triggered recently, because i.e. someone had rung the device, this will be shown next to the description of the device on the right-hand side.

1. Main menu

These three items will take you to the following screens.

 Live-Screen

 History (page 4)  Settings (page 5)

History

This  screen  allows  you  navigate  through  your  visitor  1)   Visitor history images

history. A maximum of 50 visitors each can be stored in  If you hold your finger over an image in the visitor history the  doorbell  and motion  event  navigation.  A  51st  visitor  for  a  while,  you  will  be  able  to  save  the  image  to  your would  then  cause  the  details  of  the  first  visitor  to  be  mobile device and also forward the image by email. For overwritten  according  to  the  circular  buffer  method.  An  that, you  need to give the App access to your photos.

image is stored in the visitor history once a visitor presses

the  doorbell.  Images  cannot  be  deleted  manually  for

reasons of data integrity and security. In the event that you  2)   Event date and time

need to comply with any data protection laws, you can fully  This shows the event date with a timestamp. In case that deactivate  the  history  function  within  the  administrative  these details are incorrect, please double check the details section in the App.  and accessibility of the NTP server which you can setup in

the administrative section.

1. Navigation controls (left, right)

Tab and swipe the small images to switch between events in visitor history.

1. Navigation switch

Tap on this icon to switch between doorbell and motion event.  A  history  of  video  recordings  is  also  available,  if cloud recording pro is enabled.

For more information about  cloud recording, please visit our website:

www.doorbird.com/cloud-recording

Settings  8)  Reset to factory defaults

 

You can manage all the relevant settings from this screen.

 

 

1. Device – Add

Tap this button to add a device to the App.

1. Device – Edit

Tap  on  an  entry  in  order  to  edit  a  device  that  you’ve already added to the App.

1. Hands-free Mode

Use  this  option  to  activate  or  deactivate  the  hands-free mode in the App. Hands-free mode is useful if you want to be able to see your visitor whilst you talk to them. Also, we recommend that you activate it, if you are using Bluetooth devices such as speakers or headphones with your mobile device.

1. LAN only mode  

In LAN only mode,  the video & audio connection of  the Live-Screen  will  only  be  established,  if  your  device  is connected  to  the  local  network  /  WiFi.  This  mode  is particularly good for fixed devices, e.g. indoor door station.

1. Administration

Tap this function to access the administrative section for your device.

1. WiFi Setup

 

Press here to reset any DoorBird device within your local network and completely delete the image history. You will receive new access data after the reset  to the  provided owner email of the device. Note that your device must be connected  by  network  cable.  In  addition,  this  function requires  both  the  device  and  mobile  device  to  be connected  to  the  internet  and  on  the  same  network. Please  follow  the  steps  described  in  the  App  for  the chosen device in this section in order to reset it.

1. News Blog 

Here you will find the latest news from DoorBird and all information about new product releases.

1. Information

Tap this controller to view general information about the App. There you have the possibility to send us feedback via  email,  too.  Moreover,  you  can  send  diagnostic information of your DoorBird device along with your email.

 

Tap this function to edit the WiFi settings of your device, if you want to connect your device with your local WiFi. In this  case,  please  note  the  step-by-step  instructions  for your device and carry it through to the last step.

7)  Manual & Videos

Tap this function to open the browser and read the user manuals or view installation videos for your device from our website on your mobile device.

Add Device

 

You  can  manage  all  the  relevant  settings  for  adding  a device  from  this  screen.  More  advanced  settings  are available afterwards by editing the added device.

 

 

1. Save

Tap this button to save your settings.

1. User 

Enter your device’s username as given in the “DIGITAL PASSPORT” document in the QUICKSTART guide on the left side. 

1. QR-Code Scanner

If  you  have  a  QR-Code  available  you  can  set  the information  (username,  password)  by  tapping  on  this symbol  in  order  to  scan  the  QR-code  of  the  “DIGITAL PASSPORT”. This way, you don’t have to type it in. (For that only) the App requires the camera permission of your mobile device. 

1. Password 

Here you’ll need to enter your device’s password.

1. Device (Comment)

Here  you  can  enter  any  textual  descriptions  for  your device, which will appear next to it in the device overview. Simply type a name alias you want, for instance, “lobby” or “garden gate”. However, umlauts and special characters cannot be entered for compatibility reasons.

1. Speaker Device

Using this slider you can control how loud your voice will be played back via the device. The default setting is 50%. This  default  value  of  50%  fits  almost  any  installation. Changing this value may quickly lead to over-modulating and / or non-understandable speech.

 

1. Security – Confirm action

Activate this option so that every action on the Live-Screen has to be reconfirmed by an additional tap on the screen to  confirm  your  actions.  This  function  helps  prevent accidental key presses which could lead to issues such as inadvertently opening the door etc.

 

Edit Device

 

Tap  on  a  device  in  the  Setting-Screen.  Then  you  can manage all the relevant settings of your device and adapt these to your personal taste within the App. These options are  more  advanced  than  those  presented  to  you  when adding the device. To be able to use these functions, your device must either be online or be on the same network (LAN) as your mobile device. 

 

 

1. Save

Tap this button to save your settings.

1. User 

This is your device’s username.

1. Password 

This is your device’s password.

1. Device (Comment)

Tap here to edit the comment field of your device. This will be visible i.e., when you receive a push notification.

1. Push Notifications - Doorbell

Activate  this  option  to  receive  push-notifications  when someone rings your doorbell and/ or to change the tone of the push-notification. Please ensure that you’ve enabled the  App  to  use  push-notifications  (check  the  global settings in the operating system or the notification center).

1. Push Notifications - Motion

Activate this option to receive push-notifications when the motion detector is triggered and/ or to change the tone of the push-notification. Use the administrative section of the App to check whether the motion detector is activated on the  device.  Please  ensure  that  push-notifications  are enabled  for  the  App  (check  the  global  settings  in  the operating system or the notification center).

1. Geofencing  

Enable this option if you want to receive push-notifications when you are inside a certain area. For instance, you can set the location so that you receive notifications only when you are at home. You can set a distance radius between 100m and 500m.

 

1. Confirm actions

Activate this option to enable function ‘’Confirm actions’’. Then,  each  action  on  the  Live-Screen  will  have  to  be confirmed before execution (turn on IR-Light, open doors etc.).

1. Locks – Relay (and other)

In this subsection, you can activate supported smart locks to use in combination with the device next to the standard relay. A list of compatible smart locks can be viewed here: http://www.doorbird.com/connect

1. Delete

Tap this button and confirm in order to remove this device from the App.

1. Firmware information and connection

Here  you  can  find  the  firmware  version  and  connection method  (LAN/WiFi)  that  is  currently  active  on  your DoorBird.  Please  note  that  all  devices  are  automatically updated to the latest version of the firmware if they are online. You can find current firmware information at www.doorbird.com/changelog.

 

Administration – Login 

 

You can manage device settings from this administrative section, which can be applied to users of a device as well as to users on this mobile device. To be able to use these functions, your device must either be online or be in the same network (LAN) as your mobile device.

 

 

1. Search

Tap  this  button  to  search  for  all  devices  in  your  local network (LAN) that are linked to your mobile device. The devices are detected via Bonjour technology. This function is helpful for support purposes but not required for regular use of the App.

1. Admin name  

Enter  the  App  Administrator  username  for  your  device, which can be found in the “DIGITAL PASSPORT” in the “QUICKSTART Guide” document, which is being found in the box of your device.

1. QR-Code scanner

If you have a QR-Code available (also see the “DIGITAL PASSPORT”  document)  you  can  set  this  information (Admin  username,  Admin  password)  by  tapping  to scan the QR-Code symbol and don’t have to type this in.

1. Admin password 

Enter the Admin password for your device, which is found in  the  “DIGITAL  PASSPORT”.  You  can  generate  new passwords for the Admin and users in later sections.

1. Save login

If  you  enable  this  feature,  the  Admin  login  of  a  certain device will be listed the next time you visit the page. This way, simply click on the saved login to continue.

1. Continue

Tap  this  button  to  enter  the  administrative  section  with valid Admin credentials.

 

1. Delete saved Admin logins

Swipe  left  to  delete  formerly  saved  Admin  login credentials.

Administration – Settings  

The  possible  settings  vary  depending  on  the  device  5)  Device name

configuration  and  its  model.  For  example,  there  are  Enter a device name alias that will then be displayed in the advanced settings e. g. for the display or keypad module.  list of saved Admin Logins. 

Settings that do not apply to a device are automatically

hidden, so this display may differ. 6)  Cloud Recording Free

In this section you can enable/disable the image history for

1)  Save  Doorbell and Motion event that will be securely stored on Tap this button to save your settings. our servers – under Storage duration it is possible to set

when the data will be deleted automatically. Pressing the 2)  User  information button will redirect you to 

Shows a list of all users registered to the particular device.  http://www.doorbird.com/cloud-recording

The “devicename”0000 user is the Administrator of your

device. Added Usernames to the App start with “…”0001.  7)  Cloud Recording Pro

You can edit a user account by tapping on it. You  can  enable/disable  the  optional  video  history  for In  the  case  of  systems  with  more  than  one  bell  or  Doorbell and Motion event – under Storage duration it is respectively  with  a  keypad,  corresponding  keys/codes  possible to set when the data will be deleted automatically.  must be assigned to the user. Users without assignment  More information at 

appear in red (you can assign those under “Edit user").  http://www.doorbird.com/cloud-recording

1. Add Users  Tab „Subscription” to see the actual subscription status of Tap  on  this  controller  to  be  able  to  add  a  user  on  the  your Cloud Recording pro, you can request a trial version, device. You can add as many users as you require, i.e. for  too (can only be done once).

your family and co-workers. You can also delete a user at

any time, i.e. if  a co-worker’s term of employment ends  8)  3D Motion Sensor – Activate  

and they should no longer have access to that device. Here, you can activate the Motion sensor which will trigger notifications if motion is detected. If the motion sensor is

1. Owner Email Address  disabled,  e.  g.  when  it  is  required  by  local  privacy Enter the email address of the device’s owner. This is  regulations,  no  user  of  the  device  can  be  notified  by  a push message when movement is detected.   

strongly advised. With the aid of this email address it is  (Models: D10x und D20x)

possible to restore the device to its factory settings in the

event that you lose your Administrator username and  9)  3D Motion Sensor – Settings  

Administrator password details. In order for this email to  Tap  here  to  enter  the  setting  menu  for  the  3D  motion

sensor, where you can i.e. schedule at which times the be sent, your mobile device must have an email account

sensor shall be active or in which particular zones motions already configured. The App will ask you to confirm the  shall be detected. 

email address.  (Models: D10x und D20x) 

1. 4D Motion Sensor – Activate   In the "Button Configuration" area, which only appears Enable this option to enable the 4D motion sensor of your  on D21x models with multiple bell buttons, you can assign

device. On models with display, this function is preset by  the  respective  buttons  to  the  corresponding  users.  You default, as the area detection runs through this sensor to

activate the display when someone approaches.  can assign up to 18 buttons.

If the motion sensor is disabled, e. g. when it is required by

local  privacy  regulations,  no  user  of  the  device  can  be  12)  Button Configuration – Settings  

notified by a push message when movement is detected. Tap here to get a list of all the bell connections. The bells (Models: D21x)  in the system are usually connected from top to bottom.

For  each  button  in  the  list,  you can  give a  name  Alias,

1. 4D Motion – Settings  create schedules for actions and set the "Validation type". Here you have the possibility to set a pause between the  For  more  information  on  the  Validation  types,  see  the

alarms  (30s  to  5min),  a  distance  (~1  to  ~10m),  the  menu option „Validation types/-schedules“ on page 13. direction of movement, which shall be detected (coming,  (Models: D21x with multiple buttons)

leaving, both), and a schedule for actions. The schedule

allows  you,  for  example,  to  specify  that  you  want  to  13)  Button Configuration – History  

receive Push-messages only during daytime.

Here you will find an overview of the last 30 bell activities For  more  information  on  the  schedule,  see  the  menu

with date and time.  

option „Validation types/-schedules“ on page 13.

(Models: D21x with multiple buttons)

(Models: D21x)

1. Button Configuration – Illumination 

Tap  here  in  order  to change  the  illumination  of  the bell buttons between „Automatic“, „Always on“ and „off“. (Models: D21x with multiple buttons)

 

The  Keypad settings can be found on the D21x models  The  RFID Transponder is available for all devices of the with a fixed hardware keypad. D21x series

1. Keypad – Settings   19)  RFID – Settings  

Tap here to assign codes to ring or access the gate to the  Tap here to assign your RFID transponder to the device. device. You can assign a name and a “Validation type”  To do this, hold the transponder in front of the small black (“Weekly  schedule”,  “Date  range”  and  “once”)  with  the  window  underneath  the  loudspeaker  to  store  the  –  still corresponding  actions.  For  more  information,  see  the  unknown - ID in the device. Then you can add it by tapping menu option „Validation types/-schedules“ to each code. “Add” and choose it from the list of read IDs.

It  is  not  possible  to  assign  the  same  code  twice,  but  You can assign a name and a valid time category (“weekly several actions can be performed for each code.  plan”,  “date  range”  and  “once-only”)  to  the  transponder (Models: D21x with keypad)  with the corresponding actions. For more information, see

the  menu option  „Validation types/-schedules“. Also, you

1. Keypad – History   can remove a transponder here.

Here you will find an overview of the last 30 codes entered  (Models: D21x)

with date and time.  

(Models: D21x with keypad)  20)  RFID – History  

Here  you  will  find  an  overview  of  the  last  30  access

1. Keypad – Illumination   attempts using RFID. 

Tap here to toggle the illumination of the keypad between  (Models: D21x)

"Automatic", "Always on" and "off". 

(Models: D21x with keypad)

1. Keypad – Button sound  

Activate or deactivate the sound tone, when the button is pressed, here. 

(Models: D21x with keypad)

In the Favorites area, you can define settings for SIP and HTTP calls that start a call-in/call-up in combination with actions (Ringing, button press, RFID, or Keypad-Code).  The favorites can then be assigned to individual users or actions  in  the  corresponding  menu  items  or  actions according to the “Validation type”.

1. HTTP Calls 

Type here to configure HTTP Calls

1. SIP Calls  

Type here to enter a SIP address and the corresponding name for it.

1. Peripheral – Settings  

Tap  here  to  add  peripheral  devices  such  as  our DoorChime or DoorController (see page 16).

1. NTP-Server 

Enter the details of an NTP-Server (time server) that the device should use to sync the current time. The default server used is: “pool.ntp.org”.

1. Relays

Tap here to get a list of available relays. For each relay,

you can set name, mode and the duration that the relay contact  triggers  when  pressed  in  the  Live-Screen  (in default mode). Please Note: When the relay is in  toggle mode, you have to press the “Door Opening” button in the Live-Screen a second time in order to lock the door again.

1. Info module LED (Models with Info Module)

Touch  to  toggle  the  illumination  of  the  Info  Module between "Automatic", "Always on" and "off". You can also turn the LEDs on/off in the “Live” screen. 

1. Button Sound

Tap here to select the button sound of the device itself.

 

1. IR Light

Tap here to turn off IR Light or to leave it on automatic (will turn itself on when a motion or ring event is detected).

1. Image Sensor

Tap  here  to  change  contrast  and  brightness  of  your DoorBird if necessary.

1. Schedule for doorbell (single bell/code)

Here you can schedule the device for actions which apply to all users. If you don´t want a user i.e. to have access to scheduled  relays,  you  can  set  this  in  user  permissions (more on that on page 14).

1. System diagnostic volume

Tap  to  change  the  volume  of  the  system  messages.  If silent, the voice will be quite quiet.  

1. SIP Settings

Tap here to enter the SIP Settings menu (see page 14).

1. Restart device  

Tab  here  to  restart  your  DoorBird.  The  restart  can  take about 120 seconds.

New: DoorBird Connect 

Using the External video service (NVR), DoorBird devices can  communicate  or  be  integrated  with  3rd  party

applications.  For  more  information  visit http://www.doorbird.com/connect

New: Module Ports (Models: D21x)

Here you  have an overview over the  modules, which are installed on your DoorBird like i.e. our Info Panel, display or the keypad. 

 

 

 

 

Administration – Validation type/-schedule

In different areas you can choose whether you want to use

a button, a code or an RFID transponder once only, in a certain  date  range  or  with  a  weekly  schedule.  All  three settings are explained below.

Once

 

If Actions are set, they get performed only once after being triggered.  Afterwards,  they  won´t  be triggered again and have to be manually reactivated (i.e. for One-Time-Codes for the KeyPad). 

1. Is valid

Here you can activate the validity of your button, code or transponder or want to do so later.

1. Actions

Select  here  whether  an  action  is  to  be  executed  via  a favorite and/or a relay.

Date range

 

 

1. Date range  1)   Select a category

Specify a time period in which actions for a specific code,  Tap  here  to  display  and  navigate  to  the  schedules  for transponder or button will be performed.  notifications, relays, HTTP or SIP call. HTTP and SIP must

first be entered in the favorites and  - currently  – only one

1. Actions  HTTP and one SIP call can be scheduled.

Select  here  whether  a  notification  shall  be  sent  or  an

action is to be executed with the help of previously created  2)   Range selection

favorites and/ or available relays. Activate or deactivate the entire area.

1. Actions  

Weekly schedule

Tap  here  in  order  to  navigate  through  the  relays  or favorites in order to set a schedule.

1. Weekly schedule

Here  you  can  activate  (blue)  or  deactivate  (white)  the desired area by tapping and/ or dragging the fields. Scroll the table down by swiping vertically on the times on the left side.

 

Administration – Edit User

 

1. Save

Tap this button to save your settings.

1. User

This  shows  the  username.  As  we  place  great  value  on creating secure products, user accounts cannot be edited by  hand  as  these  are  generated  by  the  product automatically.

1. Password

This shows the password.

1. Change password

Tap this button to generate a new password. As we place great value on creating secure products, it is not possible to set a new password by hand as these are generated by the product automatically. 

1. Name (comment)  

You can enter a name Alias for the user account. You can choose any name you like, for instance “David”. However, umlauts  and  special  characters  cannot  be  entered  for compatibility reasons.

1. Permissions  

In this menu you can assign Permissions and Access to the user. Deactivate “Watch always” to prevent live images to  be  transmitted  unless  someone  recently  rang  your doorbell.  Also,  you  can  allow  the  to  see  a  history.  You should  deactivate  those  options  if  required  to  do  so  by local  data  protection  laws.  Next  to  that,  you  can  allow access to only certain relays (i.e. “Garden door” but not “House door”).

Furthermore, permissions for our peripheral devices can be assigned here, too.

 

1. Assign Doorbell

In the case of a bell system with multiple bell buttons or access  codes,  the  associated  buttons/codes  must  be assigned to the individual users here.

1. Send by e-mail

Tap this button to send the above listed data to you by email.  Moreover,  a  QR  code  is  generated  as  email attachment so that the user is easily able to scan the data after modification.

1. Delete

Tap  this  button  to  remove  the  user  shown  from  your device. However, the “….0000” user is the administrator username and therefore cannot be deleted.

 

Administration – SIP Settings

 

1. Save

This saves your settings.

1. SIP activated

Tap this button to activate SIP functionality.

1. SIP Proxy, User and Password

Use these fields to enter information from your SIP server (Proxy-domain/ip, user and password)

1. DTMF

Activate  this  function  to  be  able  to  enter  PIN  codes  for your SIP device.  Then, you will be able to turn on the LED lights  and  trigger  the  relays  of  the  device  via  SIP communication.

1. Light PIN

Switch on the LED lights on the DoorBird via PIN on the telephone. Always confirm the code on the phone with #.

1. Relays PIN

Switch  the  relays  on  the  DoorBird  via  PIN  on  the telephone. Always confirm the code on the phone with #. Please note that you have to re-enter the PIN, if the relay is in toggle mode and you want to switch it back.

 

1. Allow incoming calls

Activate this function to be able to call the device.

1. Allowed SIP Users

Here you can specify which SIP users are able to call the device. You can enter multiple SIP users.

1. Noise cancellation

Activate/deactivate  the  out  suppression  here.  Try  the quality of the connection during setup, and check which setting is best for you.

1. Microphone and Speaker volume

You can set microphone and speaker volume during the SIP call.

1. Last error code  

You can use the error code to resolve problems with the SIP installation. For this purpose, the output is formatted to the standard SIP response codes.

Administration – Add Peripherals  

1. Add

Tap  here  to  add  new  devices.  Select  between  the appropriate devices and follow the instructions.

You will need the credentials of the peripheral device.

1. Peripherals list

All added additional devices (e.g., the DoorBird IP Door Chime) associated with the current device are displayed here.

 

Administration – IP Door Chime

 

1. Save

This saves your settings.

1. Device properties

This is where the firmware version is listed.

1. Name

This is the name of the peripheral device.

3)  Owner Email Address

Enter your current email address here.

1. Password

This is the password of the peripheral device.

1. Change password

Click here to generate a new password for the device.

1. Flash LED on ring 

Use the slider to activate or deactivate the flashing of the LED on your DoorChime.

1. Volume

Use the slider to adjust the volume of your Door Chime sound.

1. Test on Door Chime

Test the bell volume on the linked Door Chime.

 

1. Ring Settings  

Configure the signal settings of your Door Chime and add additional signals in this submenu.

 

1. Add

Here  you  can  add  further  signals.  For  systems  with multiple ring buttons or key codes, certain ringtones can be  assigned  to individual  users,  but  the  "Default" signal must be deactivated.

1. Delete

Delete the connection of your DoorBird / BirdGuard to the IP Door Chime here.

 

New: Send by e-mail

You  can  now  send  the  newly  generated  password credentials together with a QR-Code per email.

Administration – IP I/O Door Controller

 

 

11)  Duration

1. Save

Use  the  slider  to  set  the  switching  time  of  the  relay  in This saves your settings. default mode.

1. Device properties

This is where peripheral features are listed. 12)  Relays 2 – Settings

The settings for relay 2 are equivalent to relay 1 and points

1. Name  10) to 12).

This is the name of the peripheral device.

13)  Relays 3 – Settings

1. Owner Email Address  The settings for relay 3 are equivalent to relay 1 and points Enter your current email address here. 10) to 12).
2. Password  14)  Delete

This is the password of the peripheral device. Delete the connection of your DoorBird / BirdGuard to the

IP I/O Door Controller here.

1. Change password

Click here to generate a new password for the device.

1. Flash LED on trigger   

Use the slider to activate or deactivate the flashing of the

LED on your IP I/O Door Controller.  New: Send by email

You  can  now  send  the  newly  generated  password

1. Relays  – Settings   credentials together with a QR-Code per email.

Section  of  the  setting  options  for  connected  relays.

Individual  setting  options  are  described  in  points  10)  to  Final remark:

12).  An  added  Door  Controller  will  now  appear  in  the  “Edit device” menu, in which you can activate push-notifications

1. Mode  for it. 

Change  the  switching  modes  of  your  controller  here. default  mode  will  apply  the  duration  setting.  In  toggle mode,  you  have  to  manually  trigger  the  relay  a  second time in order to switch it back again.

1. Default position

Indicate  whether  the  relay  is  open  or  closed  when  not triggered yet.  

 

Legal Notes

Data privacy and data security  Instructions for disposal

 

General remarks

1. DoorBird  is  a  registered  trademark  of  Bird  Home Automation GmbH.
2. Apple, the Apple logo, Mac, Mac OS, Macintosh, iPad, Multi-Touch, iOS, iPhone and iPod touch are trademarks of Apple Inc.
3. Google,  Android  and  Google  Play  are  trademarks  of Google, Inc. 

 

1. For  maximum  security,  the  device  uses  the  same encryption technologies as are used in online banking. For your  security,  no  port  forwarding  or  DynDNS  is  used either.
2. The  data  center  location  for  remote  access  over  the Internet by means of an App is obligatory in the EU if the determined  Internet  IP-Address location of  the device  is within the EU. The data center is operated in line with the most stringent security standards.

 

Do not dispose of the device with regular domestic waste. Electronic  equipment  must  be  disposed  e.g.  at  local collection  points  for  waste  electronic  equipment  in compliance  with  the  Waste  Electrical  and  Electronic Equipment Directive.

 

1. The  Bluetooth®  word  mark  and  logos  are  registered trademarks of Bluetooth SIG, Inc.
2. All  other  company  and  product  names  may  be trademarks of the respective companies with which they are associated.
3. We reserve the right to make changes to our products in the  interests  of  technical  advancement.  The  products shown may also look different from the products supplied based on ongoing enhancement.
4. Reproducing  or  using  texts,  illustrations  and  photos from this instruction manual in any media – even if only in the  form  of  excerpts  –  shall  only  be  permitted  with  our express written consent.

 

3. Video, audio and any other surveillance methods can be regulated by laws that vary from country to country. Check the laws in your local region before installing and using this device for surveillance purposes.

If the device is a door-, indoor station or camera:

• In many countries video and voice signal may only be transmitted once a visitor has rung the bell (data privacy, configurable in the App).
• Please carry out the mounting in such a way that the detection range of the camera limits the device exclusively to the immediate entrance area.
• The device may come with a visitor history and motion sensor. You can activate/deactivate this function if required.

 

If  necessary,  indicate  the  presence  of  the  device  in  a

1. The  design  of  this  manual  is  subject  to  copyright  suitable place and in a suitable form.  Publisher

protection. We do not accept any liability for any errors or  Bird Home Automation GmbH any erroneous content or printing errors (even in the case Please  observe  any  relevant  country-specific  statutory  Uhlandstraße 165

of technical specifications or within graphics and technical  regulations concerning the use of surveillance components  10719 Berlin

sketches).   and surveillance cameras applicable at the installation site. Germany

1. Our  products  are  in  compliance  with  all  technical  Web:   www.doorbird.com guidelines, electrical and telecommunications regulations  Email:   hello@doorbird.com applicable in Germany, the EU and the USA.